100X remote control float valve

1. Structure and characteristics

       The 100X diaphragm remote control float valve is a hydraulically operated valve with multiple functions. It should be installed at the water inlet of a pool or elevated water tower. When the water level reaches the set height, the main valve is controlled by the floating ball pilot valve to close the water inlet to stop water supply; when the water level drops, the main valve and the float switch control to open the water inlet Fill the pool with water to realize automatic water replenishment. The liquid level control is precise and not interfered by water pressure; the 100X diaphragm remote control float valve can be installed at any position of the water pool height and the use space, and it is convenient to maintain, debug and check, and has reliable sealing and long service life. The diaphragm valve has reliable performance. High strength, flexible movement, suitable for pipelines with diameters below 450mm□. Piston type is recommended for diameters above DN500MM□.

    The hydraulic control valve is a valve for water pressure control. The hydraulic control valve consists of a main valve and its attached conduit, pilot valve, needle valve, ball valve and pressure gauge. According to the purpose of use, function and location, it can evolve into remote control float valve, pressure reducing valve, slow closing check valve, flow control valve, pressure relief valve, hydraulic electric control valve, water pump control valve, etc.

    A filter should be installed before the 100X remote control float valve, and it should be easy to drain. The hydraulic control valve is a self-lubricating valve body that uses water and does not require additional lubrication. If the parts in the main valve are damaged, please disassemble it according to the following instructions. Note: The general consumable damage products in the inner valve are diaphragm and spring (mainly rust).

    However, there are still some misunderstandings in the application of hydraulic control valves in engineering, such as the applicable conditions of the valve, the design and selection requirements of the valve, and the main points of installation.

2. Technical parameters

Three, parts materials