800X differential pressure bypass balance valve

Structure and characteristics

      When a fire occurs, a large amount of water is needed for firefighting, immediately cut off the domestic water to ensure sufficient firefighting water; when the pressure of the fire stop water is reduced, the valve will automatically open and be in a normally open state to restore the domestic water supply. This valve eliminates the need to set up a separate fire-fighting separate water supply pipe network for the system, which greatly saves construction costs and water consumption. The valve control has high sensitivity, safety and reliability, easy debugging and long service life.

    The hydraulic control valve is a valve for water pressure control. The hydraulic control valve consists of a main valve and its attached conduit, pilot valve, needle valve, ball valve and pressure gauge. According to the purpose of use, function and location, it can evolve into remote control float valve, pressure reducing valve, slow closing check valve, flow control valve, pressure relief valve, hydraulic electric control valve, water pump control valve, etc.

    A filter should be installed before the 800X differential pressure bypass balance valve, and it should be easy to drain.

    The water conservancy control valve is a self-lubricating valve body that uses water, and no additional oil is required for lubrication. In case of damage to the parts in the main valve, please disassemble it according to the following instructions.

    However, there are still some misunderstandings in the application of hydraulic control valves in engineering, such as the applicable conditions of the valve, the design and selection requirements of the valve, and the main points of installation.