PRODUCT NAME:
一、结构与特点
1、高温、高压介质的管路或装置上宜选用截止阀。如火电厂、核电站,石油化工系统的高温、高压管路上。
2、管路上对流阻要求不严的管路上。即对压力损失考虑不大的地方。
3、小型阀门可选用针阀、仪表阀、取样阀、压力计阀等。
4、有流量调节或压力调节,但对调节精度要求不高,而且管路直径又比较小,如公称通经≤50mm 的管路上,宜选用。
5、合成工业生产中的小化肥和大化肥宜选用公称压力PN160 公称压力16MPa 或PN320 公称压力32MPa 的高压角式截止阀或高压角式节流阀。
6、氧化铝拜耳法生产中的脱硅车间、易结焦的管路上,易选用阀体分开式、阀座可去处的、硬质合金密封副的直流式截止阀或直流式节流阀。
7、城市建设中的供水、供热工程上,公称通经较小的管路,可选用截止、平衡阀或柱塞阀,如公称通经小于150mm的管路上。
二、制造标准
设计与制造: GB12233
法兰尺寸:JB/T79 GB9113
结构长度: GB12221
检验与试验: GB/T13927
PRV PRODUCT:没有了!
NEXT PRODUCT:J21H型锻钢截止阀
Gas gate valve product production standards and product performance specifications
How should gas gate valve products meet user requirements
Standard operation of gas gate valve
Introduction to the product structure and characteristics of all-welded ball valves
Standards for the use of gas gate valves
Talking about the selection of the valve body material of the gas gate valve